Pump Tank Station | 1000 Gallon Capacity

Model: PTS-1000

Product Overview

These ready-to-run pump tanks are built from heavy-gauge steel and strengthened with perimeter reinforcement. Custom options are available to meet your specific application requirements.
Available for tower water systems (PTS) and chilled water systems (CPTS).
Advantage offers PTS/CPTS systems in capacities from 275 to 3000 gallons.

Specifications

Model: PTS-1000 (1)
Reservoir Construction
Material : Epoxy Coated Mild Steel
Reservoir Capacity
To Overflow : 1,000 gallons
Operating (Tower) : 560 gallons
Operating (Chiller) : 750 gallons
Maximum Recommended Flow
Total Flow : 900 GPM
Connection Sizes
Water Make-Up : 1"
Drain : 1.5"
Overflow : 4"
Dimensions
Height : 79"
Width : 72"
(tank) Depth : 48"
(2 pumps) Depth : 100"
Weight(2)
Tank Only (dry) : 3,250 lbs
Tower (operating) : 7,920 lbs
Chiller (operating) : 9,505 lbs
To Overflow : 11,590 lbs
Process Pumps (3) (Click pump model for information)
• PP-2

Capacity
HP: 2
GPM: 40
PSI: 40
Full Load Amperage
230/3/60: 6.8
460/3/60: 3.4
757/3/60: 2.7

• PP-3

Capacity
HP: 3
GPM: 60
PSI: 48
Full Load Amperage
230/3/60: 9.6
460/3/60: 4.8
757/3/60: 3.9

• PP-5

Capacity
HP: 5
GPM: 90
PSI: 48
Full Load Amperage
230/3/60: 15.2
460/3/60: 7.6
757/3/60: 6.1

• PP-7.5

Capacity
HP: 7.5
GPM: 150
PSI: 58
Full Load Amperage
230/3/60: 22.0
460/3/60: 11.0
757/3/60: 9.0

• PP-10

Capacity
HP: 10
GPM: 210
PSI: 60
Full Load Amperage
230/3/60: 28.0
460/3/60: 14.0
757/3/60: 11.0

• PP-15

Capacity
HP: 15
GPM: 300
PSI: 60
Full Load Amperage
230/3/60: 42.0
460/3/60: 21.0
757/3/60: 17.0

• PP-20

Capacity
HP: 20
GPM: 405
PSI: 60
Full Load Amperage
230/3/60: 54.0
460/3/60: 27.0
757/3/60: 22.0

• PP-25

Capacity
HP: 25
GPM: 525
PSI: 55
Full Load Amperage
230/3/60: 68.0
460/3/60: 34.0
757/3/60: 27.0

Tower Pumps (3) (Click pump model for information)
• TP-2

Capacity
HP: 2
GPM: 60
PSI: 25
Full Load Amperage
230/3/60: 6.8
460/3/60: 3.4
757/3/60: 2.7

• TP-3

Capacity
HP: 3
GPM: 90
PSI: 25
Full Load Amperage
230/3/60: 9.6
460/3/60: 4.8
757/3/60: 3.9

• TP-5

Capacity
HP: 5
GPM: 210
PSI: 25
Full Load Amperage
230/3/60: 15.2
460/3/60: 7.6
757/3/60: 6.1

• TP-7.5

Capacity
HP: 7.5
GPM: 255
PSI: 25
Full Load Amperage
230/3/60: 22.0
460/3/60: 11.0
757/3/60: 9.0

• TP-10

Capacity
HP: 10
GPM: 405
PSI: 25
Full Load Amperage
230/3/60: 28.0
460/3/60: 14.0
757/3/60: 11.0

• TP-15

Capacity
HP: 15
GPM: 525
PSI: 25
Full Load Amperage
230/3/60: 42.0
460/3/60: 21.0
757/3/60: 17.0

Evaporator Pumps (3) (Click pump model for information)
• EP-2

Capacity
HP: 2
GPM: 60
PSI: 25
Full Load Amperage
230/3/60: 6.8
460/3/60: 3.4
757/3/60: 2.7

• EP-3

Capacity
HP: 3
GPM: 90
PSI: 25
Full Load Amperage
230/3/60: 9.6
460/3/60: 4.8
757/3/60: 3.9

• EP-5

Capacity
HP: 5
GPM: 210
PSI: 25
Full Load Amperage
230/3/60: 15.2
460/3/60: 7.6
757/3/60: 6.1

• EP-7.5

Capacity
HP: 7.5
GPM: 255
PSI: 25
Full Load Amperage
230/3/60: 22.0
460/3/60: 11.0
757/3/60: 9.0

• EP-10

Capacity
HP: 10
GPM: 405
PSI: 25
Full Load Amperage
230/3/60: 28.0
460/3/60: 14.0
757/3/60: 11.0

• EP-15

Capacity
HP: 15
GPM: 525
PSI: 24
Full Load Amperage
230/3/60: 42.0
460/3/60: 21.0
757/3/60: 17.0

Specification Notes:

Since product innovation and improvement is our constant goal, all features and specifications are subject to change without notice or liability. Selection of certain optional features may change listed specifications.
Displayed weight data does not include the weight of pumps or controls.
Pump Specifications shown here are provided for representation of capacity. Consult with Advantage for specific pumps to use with your process. Evaporator Pumps are provided for Chilled water systems. Tower pumps are provided for Tower water systems.

Features

Pumps
Careful consideration to service, efficiency and motor protection are central to the design and selection of each pump
Nominal flow rates are 2.4 gallons per minute per ton for chilled water systems and 3 gallons per minute per ton for cooling tower systems
Process pumps are selected to provide 45-65 pounds per square inch of pressure
High efficiency centrifugal pumps are used for high flow to promote heat transfer
Full pump trim including suction & discharge valves are included and is constructed of Schedule 80 PVC or welded steel depending on pipe size and duty
Pumps providing higher flow rates and/or higher pressure are available
A pump discharge pressure gauge as well as starter and motor protection are included, assuring the pump tank station performs optimally and reliably

Options

Variable Speed Drives
When used for pump control a pressure transducer senses process pressure and provides feedback to the drive to adjust the process flow rate to meet the current system needs
When used for cooling tower fan control a temperature transmitter senses the process water temperature and provides feedback to the drive to adjust the fan speed to meet the current cooling needs of the system
Based on settings, automatically uses the minimum energy necessary for the system saving energy, wear and money
A 20% motor speed reduction can save nearly 50% in pumping or fan energy

Support Documents

Literature

Download

1.4 MB

Updated on March 2019

Manual

Download

665 KB

Updated on July 14, 2022

Product Image

Model PTS-1000 shown

Model PTS-1000 shown.. Image shown is typical. Actual unit appearance will vary according specifications and options.