POLYETHYLENE RESERVOIRS use a patented hybrid design to create a structurally sound cylindrical reservoir that offers total corrosion resistance in most cases of untreated water.
Typical pump tank stations can provide process flow from 40 to 1250 GPM (2 to 60 HP pumps).
STEEL RESERVOIRS use rolled steel sheets configured into a baffled reservoir that is double pass welded and reinforced with angle iron belting. Mild Steel reservoirs
are coated on all wetted surfaces with a epoxy-tar layer to prevent rust or corrosion. Stainless steel is also available.
Typical pump tank stations can provide process flow from 40 to 1250 GPM (2 to 60 HP pumps).
Pump tank stations and pumping systems work with one or more evaporative cooling towers in Cooling Tower Systems or with one or more chilling modules in Chilled Water Systems to provide a
complete central process cooling water distribution system.
Pump tank stations and pumping systems use a large fluid reservoir and circulating pumps to move water through the plant's distribution system. Pump tank stations are offered in 200 to 3000 gallon
capacities for the reservoir with circulating pumps and pumping systems offered from 1HP to 100HP. Reservoirs are available in polyethylene, stainless steel or epoxy coated mild steel.
Need Application Assistance?
Our Experienced Team Can Save You Time & Money.
Tell Us About Your Project
Close
This site uses cookies to offer you a better browsing experience. Learn more about how Advantage Engineering, Inc. uses cookies by contacting the site
administrator at admin@advantageengineering.com By closing this banner, scrolling this page, clicking a link or continuing to browse otherwise, you agree to the use of cookies.
Please refer to the Advantage Engineering Privacy Policy.