- 877-290-1853
Search
To see IMMEDIATE online pricing, please complete the form below for the SK-10100-HE
Pricing will be displayed on our website when you fill out the form below and click Get Pricing Now.
This model has been placed in Legacy Status and is no longer in production. The equivalent model is the
SRT-10100.
Temperature Control Unit : Water
Model: SK-10100-HE
- Water temperature control units circulate temperature stabilized water through the process for process temperature control.
- The temperature control range of this unit is 32°F - 250°F.
- A pump circulates water through the process. A heater and a cooling valve work together to control the water temperature.
- This temperature control unit requires a plant water supply source.
- Advantage temperature control units are portable, built on casters to easily move the unit between processes.
- Units are available with a variety of different control instruments, heater sizes, cooling valves and physical packages.
SK-10100-HE- Heater (2)
- kW : 10
- Process Pump
- HP : 7-1/2
- GPM : 100
- PSI : 47
- Cooling Valve
- Type : Modulating
- Size : 1/2"
- Control Instrument
- Control : HE Series
- Maximum Temperature : 250°F
- (6) Minimum Temperature : 32°F
- Construction
- • Nema 1 control cabinet with branch circuit protection
- • Stainless steel enclosure panels
- Full Load Amperage (3)
- 230/3/60 : 42.2
- 460/3/60 : 21.1
- 575/3/60 : 17.6
- Connection Sizes
- To Process : 2"
- From Process : 2"
- Water Supply : 1/2"
- Drain : 1/2"
- Dimensions
- Height : 44"
- Width : 16"
- Depth : 24"
- Weight (5)
- Shipping : 290 lbs
- Warranty
- • 2 years covering heater & cooling valve
- • 4 years covering HE Series control instrument
- • Lifetime covering pump seal (parts only)
- • 2 years covering balance of machine
- Specification Notes:
- 1. Since product innovation and improvement is our constant goal, all features and specifications are subject to change without notice or liability. Selection of certain optional features may change listed specifications.
- 2. Derate heater output by 25% for 208/3/60 operation.
- 3. Full load amps are higher than run load amps and must be used for sizing disconnects and supply wiring. Not for construction. Consult factory for power requirements of unit as configured and on selected options.
- 4. Consult factory for 50HZ operation.
- 5. Unit weight crated for shipment.
- 6. The Sentra cannot achieve temperatures below the cooling water supply temperature and will provide warmer water to process compared to the cooling water temperature even with the cooling valve fully open. Consult Factory for more information.
- Process Pump:
- 7.5 HP process pump
- Stainless steel shaft
- Horizontal motor extends bearing and seal life
- ODP (open drip proof) motor
- Pump seal flush line
- Custom designed impeller and casing
- High grade mechanical contactor with over current, phase loss and short circuit protection
- Cooling Vavle:
- 1/2" AVT™ modulating valve
- 0% to 100% aperature range
- Microprocessor controlled
- Integral to cooling cylinder
- Field Serviceable
- Heater:
- 10 kw
- Stainless steel sheath
- Built-In flange for bolt-in mounting
- Mechanical contactor
- Control Instrument:
- 'HE' Series Control Instrument
- Controls temperature from
30°F t0 250°F
- Cabinetry & Frame:
- Stainless steel panels
- Hinged electrical cabinet door
- Lift-off mechanical cover
- Portable, on castors
- Limits:
- Water supply pressure switch
- Process pump motor overload protection
- Process pressure relief valve
- High temperature limit protection
- Control circuit fuse
- Electrical:
- DIN rail mounted electrical components
- UL approved components
- Nema 1 electrical construction
- Pressure Gauges:
- To process
- From process
- Heating & Cooling Cylinders:
- Twin cylinders - separate heating and suction tanks
- Made from cast iron by custom molds
- Reinforced bosses for process and ancillary connections
- NPT process connections
- Each cylinder is flanged mounted to the pump casing
- Warranty (standard units):
- Lifetime on the pump seal
- 4 Years on the control instrument
- 2 Years on the cooling valve
- 2 Years on the mechanical system
- Control Instrument
- SPI communications cable - 20'
- 'HE' Series Remote Instrument with 20' cable
- Instrument - 300° Upgrade
- 'VE' Series Control Instrument
Changes Model to SK-10100-VE - Dual Zone Dolly with Water Manifold
- Modbus TCP Communications using RJ45 Connector
- System Alarms
- Visual / audible beacon
- High dB Audible Alarm
- Unit
- Mold Purge
- Closed Circuit Cooling With Expansion Tank
- Closed Circuit Cooling
- Total Non-Ferrous Unit
- Cabinetry
- Rear Panel Cover
- Electrical
- Power Disconnect Switch
- Solid State Heater Contactor
- Other Pumps
- 5 HP @ 90 GPM
Changes Model to SK-1090-HE - 3 HP @ 80 GPM
Changes Model to SK-1080-HE - 2 HP @ 75 GPM
Changes Model to SK-1075-HE - 1-1/2 HP @ 65 GPM
Changes Model to SK-1065-HE - 1 HP @ 45 GPM
Changes Model to SK-1045-HE - 3/4 HP @ 35 GPM
Changes Model to SK-1035-HE
- Other Heaters
- 34 kW
Changes Model to SK-34100-HE - 24 kW
Changes Model to SK-24100-HE - 16 kW
Changes Model to SK-16100-HE
Sentra HE Series
- HE Series Control Instrument
- Controls temperature from 32° - 250°F
- Continuous To Process temperature display
- Selectable From Process temperature display
- Continuous Setpoint temperature dispaly
- Digital Setpoint selection
- Temperature display in Fahrenheit or Celsius
- Continuous Flow display in GPM or LPM
- Continuous Capacity display in % or Actual
- Out-of-Spec alarms for temperature and flow
- Ok-Fault status indicators for Probe, Water Pressure, High Temperature, Pump Overload, Cooling Valve and Phase
- Setup display for Temperature, Flow, Network and Machine
- RS-485 SPI communications port (DB-9 receptacle)
Model SK-10100-HE shown.
Image is typical. Actual unit appearance will vary according to specifications and options.
-
Need Application Assistance?
Our Experienced Team Can Save You Time & Money.
Tell Us About Your Project
Close
This site uses cookies to offer you a better browsing experience. Learn more about how Advantage Engineering, Inc. uses cookies by contacting the site
administrator at admin@advantageengineering.com By closing this banner, scrolling this page, clicking a link or continuing to browse otherwise, you agree to the use of cookies.
Please refer to the Advantage Engineering Privacy Policy.