Evaporative Cooling Tower

To See an Immediate Price Quote

Click Here

• Advantage cooling towers are simple to operate and utilize energy efficient evaporative cooling.
• Cooling Towers are typically used to supply cooling temperatures between
  5°F to 10°F above the ambient wet bulb conditions.
• Warm water returning from the process is evenly distributed over the wet desk. Counter airflow driven by the fan causes a portion of the warm process water to evaporate cooling the remaining water.
• Advantage offers cooling towers in capacities from 45 to 540 tons in single and expanded cell systems.

TC-210F
• Capacity (2)
• Capacity : 210 tons
• Flow Rate : 630 GPM
• Direct Drive Fan
• Quantity : 2
• RPM : 1,170
• CFM : 50,930
• Motor
• Quantity : 2
• HP : 10 (each)
• Total HP : 20
• Full Load Amperage (3)
• 230/3/60 : 57.6
• 460/3/60 : 28.8
• 575/3/60 : 24.0
• Connection Sizes (5)
• To Tower : 6"
• From Tower : 10"
• Dimensions
• Height : 138"
• Width : 145"
• Depth : 84"
• Weight
• Dry : 2,250 lbs
• Operating : 5,640 lbs
• Shipping : 2,250 lbs

• Specification Notes:
• 1. Since product innovation and improvement is our constant goal, all features and specifications are subject to change without notice or liability. Selection of certain optional features may change listed specifications.
• 2. Cooling water from 95°F to 85°F at 3 gpm per ton and 78°F web bulb temperature.
• 3. Full load amps are higher than run load amps and must be used for sizing disconnects and supply wiring. Not for construction. Consult factory for power requirements of unit as configured and on selected options.
• 4. Consult factory for 50HZ operation.
• 5. When used with remote sump consult factory for connection size when the base of the tower will be used as the reservoir.
• 6. See Product Warranty Statement W-700 for details on warranty.

• Manual
• 
• Download
• 40 pages
• 3.02 MB

• Literature
• 
• Download
• 4 pages
• 2 MB

Model TC-210F

Image is typical. Actual unit appearance will vary according to specifications and options.

-